| Customization: | Available |
|---|---|
| After-sales Service: | Installation Guide |
| Warranty: | 2 Years After Leaving The Factory |
|
Still deciding? Get samples of US$ 50/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Asphaltic plug joint (also referred to as TST bridge joint) for movements up to 40 mm is a simple bridge expansion joint filled with asphalt. TST (crushed stone) elastic material is a special type of elastic-plastic material with high viscosity. Being heated sufficiently to melt, it can be poured into gravel and will be shaped into asphalt concrete form after molding to bear vehicle load.
Asphaltic plug joint can simultaneously give attention to some opposing performance requirements. For example, it can perform well in both high and low temperature (-25°C - 60°C), both permeability and viscosity. As a result, asphaltic plug joint can be used for wide temperature region to prevent vehicle-jumping at bridgehead. And bridge can be opened to traffic after two hours of construction.
Specification
| Stretching (mm) |
Slot Width (mm) |
Slot Depth (mm) |
Beam end clearance (mm) |
|---|---|---|---|
| 10 | 80-100 | ≥ 20 | 15 |
| 20 | 160-200 | ≥ 50 | 20 |
| 30 | 240-300 | ≥ 75 | 25 |
| 40 | 320-400 | ≥ 100 | 30 |
| 50 | 400-500 | ≥ 120 | 35 |
|
NO.
|
Type
|
Unit
|
Index
|
|
|
1
|
Density
|
g/cm3
|
1.20~1.25
|
|
|
2
|
Tear Strength
|
Mpa
|
0.2~0.3
|
|
|
3
|
Elongation at break
|
%
|
≥800
|
|
|
4
|
Tear off permanent deformation(15min)
|
40-60
|
||
|
5
|
Heat resistance test
163±1ºC,5h
|
Tear strength Rate of change
|
-15~15
|
|
|
Elongation at break Rate of change
|
-20~10
|
|||
|
6
|
Water absorption rate 23±2ºC,144h
|
≤4.0
|
||
|
7
|
Penetration (25±0.1ºC, 100±0.01g, 5s)
|
0.1mm
|
55-65
|
|
|
8
|
Softening Point (Global method)
|
ºC
|
≥100
|
|
|
9
|
Flash point (COC method)
|
≥240
|
||
|
10
|
Brittle point (Fulasifa method)
|
≤40
|
||
Packaging:
Transportation:
Hengshui JingTong Rubber Co., Ltd. is a manufacturing company founded in 1996 in Hengshui City, Hebei Province, China. We mainly manufacture high-class bridge expansion joints in various dimensions and for different movements. Our bridge joints are exported to all over the world, and we have won wide support and trust from consumers.
After 20 years of strenuous efforts, we have accumulated rich experience in production and international trade. At the same time, our company has gained high reputation in the metal and rubber field all over the world.
Our service
1. Advanced and Sufficient equipment More than 100 sets of most advanced equipment in our workshop ensure timely delivery time for large orders. Additional, it can ensure standardized production, which accord with international standard.
2. Experienced and skilled worker team Equipped with professional production skills and several years experience, our worker team can improve production efficiency and reduce production losses for cost reduction.
3. Multiple models for completed products We have almost all of standard bearing pad models to produce standard bearing pads, including pot bearing, laminated bearing pad, spherical bridge bearing, high damping rubber bearing and lead rubber bearings.
4. Perfect Package & Timely delivery All the products are inspected before loading, then they will be perfectly packed. Then our skilled loading team will operate the equipment for easy and fast loading.
5. Professional sales team Full knowledge of bearing pad products, good spoken and written English and excellent communication skills can offer you the best solutions to your questions. You can ask for recommendation, customized service and any other information you want from them.
Installation instructions
){kind=link}