Description of rubber steel edged water stopper:
rubber steel edged water stopper is a modification of traditional rubber waterstop with steel plate rings being inserted into the middle of vulcanized rubber. High liquid-tightness and high absorption of shear movements make the steel-edge waterstop a recommended choice for expansion, contraction joints and other construction fields with high pressure and structure variable.
Once the structure sedimentation, concrete shrinkage and creep occur, the rubber parts of steel-edge waterstops will be elongated and thin to adjust to these deformations without affecting the adhesion between steel plates and the rubber part, between steel plates and the surrounding concrete. In this way, the steel edge waterstops are able to withstand greater tension and torsion than traditional waterstops; meanwhile, it effectively prevents concrete loosen, breaking off and the form of leaking cracks.
Features of rubber steel edged water stopper :
1.Quality EPDM rubber with high tensile strength.
2.Galvanized steel plate for high rust and corrosion resistance.
3.With punched holes on the steel plate for easy installation.
4.Adjustable to high movements and deformations.
5.High adhesion between the steel plates and the rubber.
6.Excellent fastness between the steel plates and surrounding concrete.
7.Custom types are welcomed.
Application of rubber steel edged water stopper :
1.A diagram of steel-edge water stop
2.Water conservancy projects.
3.Dams, tunnels and channels.
4.Basements of high-rise building.
5.Slabs and wall junctions.
6.Duct piece joint of shield segment tunnel.
7.Construction, expansion and contraction joints.
8.Conduit joints and infrastructure deformation joints.
9.Underground engineering.
Main types of rubber steel edged water stopper :
Type |
Plan drawing |
L |
L1 |
L2 |
L3 |
T1 |
Thickness of steel plate |
SEWST-1 |
|
350 mm |
40 mm |
39 mm |
38 mm |
20 mm |
0.8 mm |
SEWST-2 |
|
350 mm |
40 mm |
- |
- |
30 mm |
0.8 mm |
SEWST-3 |
|
350 mm |
40 mm |
40 mm |
35 mm |
30 mm |
0.8 mm |
SEWST-4 |
|
350 mm |
40 mm |
39 mm |
38 mm |
30 mm |
0.8 mm |
SEWST-5 |
|
350 mm or 450 mm |
40 mm |
39 mm |
38 mm |
30 mm |
0.8 mm |
SEWST-6 |
|
350 mm |
40 mm |
- |
- |
20 mm |
0.8 mm |
Properities of rubber steel edged water stopper:
Physical properties |
B standard |
C standard |
Hardness shore A |
60 ± 5 |
60 ± 5 |
Tensile strength |
2175 psi (min) |
1740 psi (min) |
Ultimate elongation |
380% (min) |
380% (min) |
Permanent compression set 24 hours at 70°C |
35% (max) |
35% (max) |
Permanent compression set 168 hours at 23°C |
20% (max) |
20% (max) |
Brittle temperature |
-45°C (max) |
-45°C (max) |
Tear strength |
30 kN/m (min) |
25 kN/m (min) |
Galvanized steel plate and rubber adhesive (Mpa) R type damage |
6 (min) |
6 (min) |
Ozone aging, 50 PPMM, 20%, 48 hours |
2 level |
2 level |
Hot-air aging |
Hardness changes (shore A) |
8 (max) |
8 (max) |
|
Tensile strength |
12 (min) |
12 (min) |
|
Elongation at break |
300% (min) |
300% (min) |
We exported to Parkistan one type of rubber steel edged water stopper for your reference: