| Customization: | Available |
|---|---|
| Usage: | Household, Bridge |
| Material: | Neoprene |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Name: Elastomeric Laminated Rubber Bearing Pad
Further Details:
Neoprene Pad allows beam rotation at the bearing due to deflection of the beam under load. They further allow lateral and longitudinal movement of the beam caused by thermal forces.
Neoprene pads have no moving parts and thermal expansion and contractions are observed by the pads enable to give and take in shear. There is no solid motion between pad and beam or between pad and abutment.
Features:
(1)Quality materials including natural rubber, neoprene complying with AASHTO standards.
(2)Allow for expansions and contractions of precast steel structure of bridges.
(3)Capable to control load distribution, meanwhile accommodate thermal and end-beam rotational movements.
(4)Vibration, sounds and shocks isolation.
(5)Avoid excessive load eccentricity and edge compression.
(6)Simple but robust structure.
(7)Lower price than laminated elastomeric bearing.
(8)High cost effectiveness.
(9)Minimal maintenance is needed.
Details:
(1)Material: natural rubber, neoprene and others as your request.
(2)Thickness: 1/8" to 30" or custom thickness.
(3)Width: 36" to 48" or custom widths.
(4)Shapes: rectangular, square or round
(5)Hardness: 50 to 70 durometer complying with AASHTO.
(6)Standards: AASHTO, ASTM D4014, BS EN 1337or other standards according to your requirements.
| Material | IRHD | Hardness | Tensile Strength | Elongation at Break | Compression Set |
| Shore A | min. psi | min. | max. | ||
| Nature rubber | 50 | 45-55 | 2500 | 450% | 25% |
| 60 | 55-65 | 2500 | 400% | 25% | |
| 70 | 65-75 | 2500 | 350% | 25% | |
| Neoprene | 50 | 45-55 | 2250 | 400% | 35% |
| 60 | 55-65 | 2250 | 350% | 5% | |
| 70 | 65-75 | 2250 | 300% | 5% |
In wovenbag on Pallet also according to customer's requirement.
Quality products
We select the best rubber, steel and stainless steel as our raw materials for manufacture of bridge bearing, and all of the products are through strict quality test to ensure our products will meet even exceed the customers' expectation.
Excellent corrosion protection
Steel components exposed to the air are corrosion protected through a series of treatments, such as sandblast treatment, galvanization, epoxy painting or other custom coatings.
Comprehensive labelling
All bearings are enclosed with labels about detail properties of products including bearing type, maximum horizontal & vertical loads, rotation & movements directions, date of manufacture or others as your requests.
Certifications
Our products are manufactured in accordance with all of the international standards, including BS EN1337, AASHO, KS4424, ISO, etc. Bridge bearing complying with custom standards can also be supplied by our company.
Related Products:
There are ten main types of bridges bearings are supplied to meet your different needs. Some specific designs are also available as your request.
Laminated elastomeric bearing is manufactured through the process of vulcanization and moulding to form a homogeneous unit with layers of steel plated embedded in. Comparing with plain elastomeric bearing, this one has higher vertical load capacity, excellent vibration and sound isolation. It is ideal for bridges with short span and flyovers, etc.
PTFE top elastomeric bearing, a variation of traditional laminated elastomeric bearing, features a layer of PTFE bonded to top surface of the bearing. In conjunction with lubricant in the dimples of PTFE, the bearing allows for excellent sliding movements with reduced friction coefficient.
Elastomeric bearing with steel plate is reinforced with outer steel plates vulcanized directly onto the surface of rubber pad. It can be manufactured with holes or pins for easy fastening. They are ideal for in-situ concrete structure, metal structures and anti-life device, etc. To suit your scheme, six types can be provided by our company.
Plain elastomeric bearing with the simplest structure among all bearing products is exclusively manufactured from natural rubber or neoprene rubber. It is considered to be a low cost choice for short span bridges, prefabricated structures, buildings as well as flyovers, etc.
Pot bearing, is the widest used type designed for structures using the incremental launching methods, highways and railways, etc. PTFE top elastomeric bearing is fitted in the steel pot plate to ease the sliding movements with the help of a stainless steel panel welded on top steel plate.
Spherical bridge bearing features its precision-machined steel plates with concave ad convex surfaces. And it can accommodate large movements and rotations in excess of +/- 0.03 radians. Spherical bridge bearings can be applied to structures with large turning angles, wide and curved bridges regardless of low temperatures even under -30ºC.
Disc bridge bearing features polyurethane disc with excellent chemical resistance, corrosion resistance regardless of various environmental influences. It can bear higher stress than traditional pot bearing and transfer shear forces owing to its threaded shear pin.
Lead rubber bearing, as its name implies, has a lead plug in the middle of the bearing that will assist the bearing to absorb earthquake-generated forces, extending the structure vibration period. In this way, lead rubber bearings protect buildings or structures from damages and severe deformations caused by earthquake.
High damping rubber bearing, manufactured from quality rubber with great damping ability and high durability, is also a seismic isolator similar to lead rubber bearing without the central lead plug.
Rocker bearings, with stainless steel pins are capable to absorb living load, constant load, compression and shear forces by providing stable movements and rotations. With high earthquake-proof property, it can be applied to areas with high seismic intensity up to 9 degrees.
Hengshui Jingtong Rubber Co., Ltd. is a comprehensive company engaged in water stop, waterproof materials, bridge building isolation materials, engineering rubber used in supporting projects such as highway bridges, tunnels, water conservancy, electric power, railway, etc. Relying on China Hengshui Rubber City Hengshui, the company has its own production capacity. It is a new rising show in the domestic engineering rubber industry, with advanced technology, mature technology and reliable quality.Jingtong rubber covers an area of 98000 square meters, with a building area of 45000 square meters. There are 20 professional senior technicians, and a diligent and dedicated management team. All employees provide high cost-effective engineering rubber products for new and old customers with scientific management, rigorous and realistic working attitude and honest and reliable service concept.The waterproof roll produced by the company has excellent performance, long service life, wide application range, safety,simplicity, high temperature resistance, 90 ºC does not flow, low temperature - 25 ºC does not embrittle. It can be used for waterproofing of buildings, basements, bridges, parking lots, roofs, gardens, swimming pools, reservoirs, tunnels and other projects of industrial and civil buildings. This product has good low temperature flexibility and elastic extension, especially suitable for buildings in high cold area. With high quality products and complete specifications, the company adheres to the working policy of high starting point, high standard, high quality and high efficiency, actively introduces technical talents and takes the road of prospering the factory through science and technology. The company strives for survival by quality, develops by prestige, and provides perfect after-sales service. We sincerely welcome friends from all walks of life. Now the company mainly produces and sells "HENGJINGGONG" brand building materials, including: Rubber / PVC / EVA waterstop, water swelling waterstop rubber, building sealant, butyl sealing tape, SBS modified asphalt waterproof roll, butyl waterproof roll, bridge building isolation bearing, bridge rubber bearing, plate rubber bearing (rubber pad), basin type rubber bearing, spherical bearing, bridge expansion device , bridge rubber inflatable core mold (hollow board air bag), rubber air bag (pipe stopper, rubber water bag) and other bridge engineering and waterproof engineering products.
1. who are we?
We are based in Hebei, China, start from 2013,sell to Domestic Market(40.00%),Southeast Asia(23.00%),Africa(16.00%),North America(7.00%),South America(7.00%),Western Europe(7.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Bridge Expansion Joint,Rubber Waterstop,Swelling Waterstop Strip,Seismic Isolation Bearing,Rubber Bearing Pad
4. why should you buy from us not from other suppliers?
1.More than 20 professional senior technical personnel.
2.There are 10 series,over 200 species and more than 2,000 specifications.
3.All products have been authenticated by the Ministry of Communications.
4.Self-research and development,professional.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES;
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese
){kind=link}