| Customization: | Available |
|---|---|
| Adhesion Strength: | High Adhesion |
| Temperature Resistance: | -20℃-80℃ |
|
Still deciding? Get samples of US$ 3/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Adopting imported high-purity butyl rubber + Daelim polymer materials of the new formula, is a stable damping molecular substrate, the surface covered with a unique corrosion-resistant water-repellent coated aluminum foil, to ensure that the surface of the product is highly stable and not easy to oxidize. Its environmental standards meet the requirements of the European Union REACH directive, and it is environmentally friendly and odorless. Its remarkable damping characteristics can immediately change the resonance effect of the original substrate, and enhance the excellent wide-band damping and sound insulation properties! The temperature range of the product is -40ºC~160ºC.
Widely used in acoustic engineering sound insulation and vibration damping, railroad trains, automobiles, pipelines and other surface damping vibration damping.
High-density butylrubbercomposite soft aluminum foilcan effectively blocks the shock and propagation ofsound waves
Odorless and highly adhesive, with ultra-high tensileproperties. Strong anti-aging properties and it will not harden or melt in extremely cold or high temperatures
| Butyl Rubber Sound Damping Mat Technical Parameter | |||
| No. | Test Item | Specifications | Inspection Method |
| 1 | Density | 1.7±0.1g/cm3 | Hydrometer Method |
| 2 | Penetration) 1/10mm | 35±10 | Penetration tester |
| 3 | Odour | No unpleasant odor | (Smell at room temperature |
| 4 | Initial Viscosity | ≥18# Small steel ball | Refer to GB/T 4852-2002/Inclined ball method/ Test sampe size 220X50X1mm~3mm) |
| 5 | Sustained Viscosity | ≥120min | The Sustained Viscosity Tester |
| 6 | High and Low Temperature Cycle | The sample maintains good viscosity. | -25ºCx2h→130Cx2h→-25Cx2h |
| 7 | Heat Flow Resistance Method | H≤0.1mm | 100ºC±3Cx5h |
| 8 | Heating Loss Rate | ≤2% | BD/JY-03-06 Take 20g of sample and place it in a constant temperature oven at 160ºC ±3ºC for 5hours |
| 9 | Water Resistance | No Peeling,No expansion | The 70mmx20mmx2mm sample is attached to the stainless steel plate and immersed in water for 72 hours. |
| 10 | Tensile Strength | >20MPa | GB/T 1171-2006 |
| 11 | Elongation | ≥500% | GB/T 30776-2014 |
| 12 | Peel Strength | ≥0.8N/mm | GB/T 2792-2014 |
| 13 | Weather Resistance | There is no collapse on the surface of the sample, and there is no change in the adhesion of the sample in contact with the test piece. |
Refer to GB/T16585-1996 GB/T 16585-1996 Rubber, vulcanized-test method for artifical weathering (fluorescent ultraviolet lamp) Time: 168hours |
| 14 | High Temperature Resistant | No flowing, no cracking, no deformation | 160ºCx8h |
| 15 | Sound Insulation | ≥24dB | GB/T 19889.3-2005 |
| 16 | Damping Performance | ≥0.5 | GB/T 18258-2000"Damping Materials-Damping Performance Test Methods" |
Factory Show
){kind=link}