Customization: | Available |
---|---|
After-sales Service: | Installation Guide |
Application: | Outdoor |
Still deciding? Get samples of US$ 3/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Production Name : PVC Water Bars used in Dam constructionConcrete Water Bar 300mm
This kind of product includes:Rubber Water-stop, Hydrophilic expansion rubber water-stop, Steel Edge water-stop, PVC Water-stop, HDPE water-stop, Bentonite Water-stop strip etc. Water-stop materials. The products comply with: KEJIJI [2008] No.21 document & GB18173.2-2000 Polymer waterproof materials part 2 :Water-stop.
Feature
Application:
PVC Waterstop Technical parameters
No. |
Item |
Unit |
Parameter |
1 |
Hardness |
Shore A |
>65 |
2 |
Tensile strength |
MPa |
≥12 |
3 |
elongation |
% |
≥300 |
4 |
Tensile modulus |
MPa |
≥5.5 |
5 |
Brittleness temperature |
ºC |
<-38 |
6 |
Bibulous rate |
% |
<0.5 |
7 |
Air aging (70±1ºC,240 hours) |
% |
≥95 |
8 |
Alkali effect coefficient (20% alkali liquor,NaOH or KON) |
|
≥95 |
* As a factory, we can manufacture according to your request.
Note:
1.Colors: blue, black, yellow, grey etc.
2.General-length:150mm,250mm,300mm,350mm,400mm, 450mm, 500mm, 600mm etc.
3.Thickness:3mm,5mm,8mm,10mm etc.
Dumbell
Applications:Ideal for construction joints and contraction joints where little or no movements are expected.
Features:With the largest and thickest profile, the dumbbell waterstops can be used in industrial applications. Meanwhile, it can be heat welded.
Dumbell with Centre Bulb
Suitable for subsidence, contraction expansion joints, including high movement joints.
Applications:Ideal for construction, control and expansion joints, on grade joints at wall / slab junctions.
Features:Capable to withstand large scale of movements. Largest and thickest profiles make this waterstop ideal for industrial applications. Meanwhile, it also can be heat-welded by standard splicing iron.
Ribbed flat
Applications:Ideal for construction joints with little or no movement.
Features:The ribs effectively enhance the bond strength between waterstop and surrounding concrete; meanwhile, it also improves water sealing capability of waterstops.
Ribbed with center bulb
Applications:Ideal for expansion, construction, control joints and other joints with shear movements.
Features:The center bulb will absorb the shear movements whether in lateral or transverse direction. Normally, the bigger the center bulbs are, the greater movements the waterstops will accommodate. Meanwhile, the ribs not only make the concrete and waterstop bonding together, but also provide a long fluid-flow path for water-proofing.
Ribbed with tear web
Applications:Ideal for expansion joints with large movements such as tank ring foundations.
Features:The tear web waterstops features its U-shaped center bulb which will tear when being subjected to large movements such as joint expansion and differential settlements. Additionally, the ribs effectively increases the contact surface between waterstop and concrete, therefore the waterstop can hold the surrounding concrete firmly than others without ribs.
Base seal
Applications:Ideal for construction, contraction, control and expansion joints flat pavement jobs. For example, they are suitable for runways, large containments slabs, concrete walls, backfilled retaining walls, etc.
Features:Base seal waterstop is easiest to install, as well as can be heated-welded by standard splicing iron.
Split waterstop
Applications:
Split dumbbell: ideal for construction joints with little or no movements;
Split ribbed: ideal for expansion moving joints on or below grade.
Features:With features similar to dumbbell and split ribbed waterstops.
Cap waterstop
Applications:Ideal for expansion joints with expansion boards.
Features:Acting as a fluid tight internal seal, the cap waterstop is long lasting and attractive to be installed on the top of expansion joints. Meanwhile, it efficiently accelerates the project schedules.
HENGSHUI JINGTONG RUBBER CO.,LTD located in Hengshui City,hebei provice,where very close to TianJin City,Beijing city ,that specializes in manufacturing and exporting bridge bearings,waterstop waterproof materials,Culvert & Pipeline Inflated Rubber Balloons since the establishment in 2007.Registered capital is 101 million RMB. It covers an area of 200 thousand square meters, including3000 square meters workshop,and 2000 square meters for testing,there are more than 200 employees,including 10 engineers and 10 testing workers.Our products including construction waterproof materials ,bridge and building rubber bearings,culvert and pipeline rubber airbag etc. Used in brige highway, culvert, pipeline,building constructions.Adhering to the principle that quality determines the success and failures. Our company pays much attention to quality managements and today we are one of the leading companies owning customers in many countries.To meet different needs of our customer, our company can supply varies types of products.Our products has passed ISO,GB etc. Inspection and provide the third party reports with more than 3000 projects in domestic,and also export to Malaysia,Kenya,Uganda,USA etc.
Our service
Certification
Q1. What is your terms of packing?
A: Generally, we pack our goods in Blank Cartons. We privode carton LOGO print service after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before after receive the copy of B/L. We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: We accept FOB,CIF,CNF,DDP,DDU,LC.etc
Q4. How about your delivery time?
A: Generally, it will take 7 to 10 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.
Q6. What is your sample policy?
A: We can supply the sample for free, client only need to pay the delivery cost.